Subscribe to Updates
Get the latest news and updates delivered to your inbox.
Get the latest news and updates delivered to your inbox.
Clever Coatings came to Shergroup Digital with a new site, no organic rankings and no measurable search presence. This is what we changed, in what order, and what the search data showed at each stage — including the technical problem that was suppressing the entire domain and took eight weeks to find.
A garage floor coating is a resin system applied over concrete to seal it, protect it from stains, chemicals and hot tyres, and give it a durable, easy-to-clean finish. There are three systems worth knowing:
the long-standing default. Affordable up front, but it cures slowly (up to a week) and is prone to yellowing and lifting in prolonged heat and UV exposure.
cures in about a day, resists UV yellowing, and stands up to Florida heat and hot tyres. This is Clever's default recommendation for most Florida garages.
similar fast-cure profile to polyaspartic, with strong flexibility and abrasion resistance — a good fit for garages that see heavy vehicle or workshop traffic.
For a direct side-by-side, see our epoxy vs. polyaspartic comparison — it walks through cure time, cost and durability in more depth.
Florida’s climate is the reason this decision matters more here than almost anywhere else in the country.
Standard epoxy yellows and chalks under sustained sun — a real problem for garages with west-facing doors or skylights. Polyaspartic and polyurea are UV-stable and hold their colour.
A car that's been sitting in Florida sun brings genuinely hot tyres into the garage. Epoxy can soften and mark under repeated heat load; polyaspartic and polyurea are formulated to handle it.
Epoxy's slow cure window means more time exposed to Florida humidity while it sets, raising the risk of a compromised finish. Polyaspartic and polyurea cure in about a day, largely sidestepping the problem.
That’s the edge Clever leads with: we fit the systems that are actually built for this climate, not the one that’s just cheapest to buy.
We inspect the slab for cracks, moisture and prior coatings, and quote a fixed price for your garage.
The concrete is mechanically ground to open the surface — this is what the coating actually bonds to, and it's the step cheap jobs skip.
Cracks, pitting and control joints are patched and levelled before any coating goes down.
Base coat and topcoat go down the same day for polyaspartic and polyurea systems — this is the step where epoxy falls behind, needing days between coats.
Most polyaspartic and polyurea floors are ready for light foot traffic within hours and full vehicle use within a day — check your specific quote for exact timing.
Garage floor coating costs vary by system, size and floor condition:
typically the lowest sticker price, but factor in the shorter lifespan and higher chance of redoing it sooner in Florida heat — see our epoxy flooring cost breakdown for real numbers.
a higher install price, offset by a 15–20 year lifespan and no redo cycle — the better cost-per-year in Florida’s climate.
It depends on the size of the garage and the system — polyaspartic and polyurea sit above basic epoxy because they last far longer. We quote against your actual floor, and the longer life usually makes them cheaper per year.
It depends on the size of the garage and the system — polyaspartic and polyurea sit above basic epoxy because they last far longer. We quote against your actual floor, and the longer life usually makes them cheaper per year.
